Good to know
Frequently Asked Questions
How to identify the right build, what the condition labels mean, what is bolted to the engine when it ships, and how freight is quoted.
Buying an engine
How do I buy an engine from Engine Den?
Open the listing, press “Check Availability” or call us, and we confirm the unit is still on the shelf. We then quote crating and freight to your ZIP code and send an invoice covering the engine and the transport. The unit is released once payment clears.
Can you hold an engine while I check my build?
Yes. Tell us the serial, arrangement or CPL number off your data plate and we will hold the unit while we compare it. Every listing is a single physical assembly, so a hold really does take it off the shelf.
Can I see more photographs or hear it run?
Ask. Every listing shows the photographs taken of that exact unit; if you want a specific angle — data plate, injector side, flywheel housing, accessory drive — we will take it. Whether a unit can be run before sale depends on how it was removed, and we will tell you plainly which it is.
Are prices negotiable?
Prices are set against what these assemblies trade for, so there is not much room on a single unit. There is room on multiples: if you are buying for a fleet or a rebuild shop, ask.
Is there a warranty?
Used assemblies are sold as-is unless the listing says otherwise, and what we know about the unit is in the description. Rebuilt and new-takeout units are a different proposition from a used pull-out — the condition field on every listing says which one you are looking at.
Identifying the right engine
Why do you publish serial and arrangement numbers?
Because the model name does not determine what fits. Two engines badged the same can take different injectors, ECM calibrations and head gaskets. The serial number, Caterpillar’s arrangement number and Cummins’ CPL identify the exact build, so they are printed on the listing rather than held back.
What is a CPL number?
Cummins’ control parts list. It is stamped on the engine data plate and identifies the exact parts configuration of that build — it is the number a Cummins parts counter will ask for, and it matters more than the model name.
What is a Caterpillar arrangement number?
Cat’s exact-build number. The serial number identifies the individual engine; the arrangement number identifies how that engine was configured and what was bolted to it when it left the factory.
How do I find the numbers on my own engine?
They are on the data plate, usually on the side of the block, the valve cover or the gear housing, and stamped into the block itself. Send us a photograph of the plate and we will read it for you.
Will this engine fit my truck or machine?
Fit depends on the mounts, the flywheel housing, the accessory drive and, on electronic engines, the ECM calibration. Send us your numbers and the application and we will go through those four things with you before you buy.
Condition & grading
What do the condition labels mean?
Used — a running take-out assembly removed from a truck or machine. New Takeout — a factory-new engine removed from a chassis or unit that was never put into service. Rebuilt — stripped and rebuilt to a published specification. Replacement — a complete replacement assembly supplied for a repower. Core — sold for the core value, not as a runner.
What comes with the engine?
The listing spells it out. Most units are complete assemblies with turbocharger, fuel system, flywheel and housing; many also carry the ECM, starter, alternator and air compressor. Anything missing is listed as missing.
Do you take core exchanges?
Some listings say “no core exchange required”, and where that is stated it is in the description. Where a core charge applies we tell you before you pay, not after.
What do hours or miles showing mean?
They are what the meter or odometer in the donor truck or machine read when the engine came out, where that was recorded. They are a guide to the life the unit has had, not a certified figure.
Freight & delivery
How much is freight?
It depends on the weight, the crating and the distance, so it is quoted per engine rather than advertised as a flat rate. Tell us the delivery ZIP code and whether you have a dock or a forklift and we will give you the real number.
How is an engine packed?
Bolted to a skid or crated, strapped, and drained where the carrier requires it. Power units and generator sets ship on their own skids.
Can I collect it or send my own carrier?
Yes. Give us the carrier and a pickup window and we will have the unit loaded and the paperwork ready.
Do you ship outside the USA?
Export is quoted case by case — tell us the destination port and we will price the crating and the freight leg.
Applications & repowers
Can I put a truck engine in a generator or a pump?
Often yes, but the rating, cooling package, governor and accessory drive all change with the duty. Tell us the application and we will say whether a given unit suits it.
Do you sell complete power units?
Yes — skid-mounted power units with radiator, clutch or pump drive, controls and a fuel tank, ready to drop into an industrial installation. They are listed under their own kind in the catalogue.
What about generator sets and bare generator ends?
Both. Sets are listed with kW, voltage, phase, frequency and hours; bare ends are listed too, which is the cheap route when your engine is good and the alternator is not, or the reverse.
Can you supply more than one of the same engine?
Each listing is one physical unit, so quantity is whatever the catalogue shows. Where several of a model are on the shelf they appear as separate listings with their own stock and serial numbers.
Selling to us
Do you buy engines?
Yes — running take-outs, rebuildable cores, surplus new-takeout assemblies, power units and generator sets. Send the make, model, serial number, hours and photographs through the Sell or Trade page.
What is my engine worth?
It depends on the make, the build, whether it runs, and whether the core is rebuildable. The numbers on the data plate are what let us price it accurately, so start with a photograph of the plate.
Didn’t find your answer?
Send us the numbers off your data plate and what the engine has to do. We will tell you whether what is on the shelf is a match.
